Melt flow Indexer TMFI-A11

Name: Melt flow Indexer TMFI-A11
Brand: Labtron.uk
SKU: TMFI-A11
Rating: 4.7 (817 reviews)

Melt flow Indexer TMFI-A11 comes in compact structure & attractive design & with high quality performance & reliable results, it can measure (melt mass flow rate) MFR, (melt volume flow rate) MVR of the sample, melt density of thermos-resins. Adopted with standard module combination structure, it can upgrade and changed the type directly, with accuracy of the results. It is designed in accordance with latest ISO international standards.

Measuring range	0.01to 600.00 g/ 10 min (MFR), 0.01 to 600.00 cm3/ 10 min (MVR), 0.001 to 9.999 g/ cm3 (melt density)
Measuring rate	0.001 S
Temperature range	50 to 400°C
Temperature precision	± 0.5°C
Resolution	0.1°C
Accuracy	0.005
Weights	Nil
Material canister dimension	Inside diameter: 9.55 ± 0.025 mm & length: 160 mm
Piston dimension	Diameter: 9.457 ± 0.01 mm & mass: 106 g
Dimension	600×400×500 mm
Net weight	85 kg
Gross weight	110 kg
Power	550 W
Power supply	220/ 110 V, 50/60 Hz

LCD digital display
Can perform three measurements: MFR/MVR/ Density
Can cut the material manually or automatically
Adopted with Microprocessor PID temperature controller
Cleaning & calibration accessories for reliable performance
Easy to use/operate

Melt flow indexer is used to determine the melt mass-flow (MFR), the melt volume-flow rate (MFV) and the melt density of thermos-resins, polycarbonates, nylon & plastic material.

Operating temperature
Ambient temperature to 300°C

Heating rate
50°C/ h (5 ± 0.5°C/ 6 min) , 120°C/ h (12 ± 1°C/ 6 min)

Maximum temp. error with heating speed
± 5°C under 50°C/ h, ± 1°C under 120°C/ h

Lasting adhesive tester TLAT-A11

Standard roller
2000 ± 50 g

Testing stations
6

Dimension (L*W*H) tester
650×210×550 mm (6 stations)

Vacuum Leak Tester TVLT-A10

Vacuum degree
0 to 90 KPa

Accuracy
1 % FS

Resolution
0.1 KPa

Heat sealer THS-A10

Seal temperature
Room temperature -250°C

Control accuracy
± 0.2°C

Dwell time
0.1 S to 999.9 S

Paper Testing Instruments

Standard strip cutter TP-G10

Sample width
15 mm

Sample maximum length
300 mm

Parallelism
≤ 0.1 mm

Whiteness and chromaticity tester TP-A10

Sample (size) length
Diameter ≥30 mm, Thickness ≤ 40 mm

Measurement mode
Diffuse reflection factor Rx, Ry, Rz, stimulus value Y10, X10, Z10, chromaticity coordinates x10, y10, z10; lightness L *, chroma a * b *, chroma C * ab, hue angle h * ab, dominant wavelength λd, excitement purity Pe, color difference ΔE * ab, lightness difference ΔL *, chroma difference ΔC * ab, hue difference ΔH * ab, Hunter system L , A, b

Stability
≤ 0.1 within 30 min

Puncture strength tester TP-J12

Measuring range
A (1 to 6) J indicating error ± 0.05 J B (1 to 12) J indicating error ± 0.05 J C (1 to 24) J indicating error ± 0.05 J D (1 to 48) J indicating error ± 0.05 J The indicating errors w.r.t measurement range of 20 to 80 %